|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Features * * * * * * * * * * * * Ideal for DECT Applications Saturated Output Power: +26 dBm Typical Power Gain: 26 dB Typical Low Current: 400 mA at PSAT Ramp Power Control Micro-Amp Shutdown Operates from 1.5 V to 4.0 V VEN configurable for either 1.7 V or 2.5 V Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound RoHS* Compliant 260C Reflow Compatible Rev. V3 Functional Schematic VCC1 N/C VCC2 GND RF OUT/ VCC3 RF IN RF OUT/ VCC3 Ven1 RF OUT/ VCC3 Description The MAAPSS0071 is a three stage power amplifier designed for Cordless Telephone applications. This power amplifier is mounted in a standard outline, lead-free 3 mm 12-lead PQFN plastic package. The MAAPSS0071 features an integrated power enable control pin. Ven2, 3 N/C N/C Pin Configuration Pin No. 1 Pin Name GND RFIN VEN1 VEN2,3 N/C N/C RFOUT / VCC3 RFOUT / VCC3 RFOUT / VCC3 VCC2 N/C VCC1 Description Ground RF Input Power Enable Power Enable No Connection No Connection RF Output, 3rd Stage Supply RF Output, 3rd Stage Supply RF Output, 3rd Stage Supply 2nd Stage Supply No Connection 1st Stage Supply RF & DC Ground Ordering Information Part Number MAAPSS0071 MAAPSS0071TR-3000 MAAPSS0071SMB 1 2 Package Bulk Packaging 3000 piece reel Sample Test Board (Includes 5 Samples) 3 4 5 6 7 8 9 10 11 12 Pad 4 1. Reference Application Note M513 for reel size information. Absolute Maximum Ratings 2,3 Parameter Input Power Operating Supply Voltage Operating Control Voltage Operating Temperature Channel Temperature Storage Temperature Absolute Maximum + 5 dBm +4.0 Volts +3.0 Volts -20C to +85C +150C -40C to +150C GND 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Rev. V3 Electrical Specifications: Frequency = 1905 MHz, PIN = -2 to 2 dBm, VCC = 2.4 V, VEN = 2.5 V, TA = 25 C, Z0 = 50 Parameter Input Return Loss Output Power Power Flatness PAE Current Current, Off Pdiss Control Pins Harmonics Forward Isolation Duty Cycle Turn on/off time Stability Ton: RF burst to NTP-1 Toff: NTP-1 to off +1.5V < VCC < +3.5 V, PIN = -2 to 2 dBm, VSWR < 6:1 -20C < TC < +70C, RBW = 3 MHz max hold Test Conditions -- -- 2.0 < VCC < 3.0 V -- -- VEN = 0 V POUT = 26.0 dBm VEN, Low VEN, High Current 2f 3f VEN = 0 V Units dB dBm dB % mA A W V V mA dBc dBc dB % S S Min. -- 24 -- -- -- -- -- 0 2.0 -- -- -- -- -- -- -- Typ. 15 26 3 45 400 3 0.5 -- -- 2.0 -35 -40 39 -- 3 2 Max -- 27 -- -- 500 10 -- 0.5 2.5 4.0 -- -- -- 100 -- -- All spurs < -60 dBc Lead-Free 3 mm 12-Lead PQFN Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Operating the MAAPSS0071 The MAAPSS0071 can be damaged by electrostatic discharge (ESD). Use proper ESD control techniques when handling this device. To operate the MAAPSS0071, turn on the VCC before VEN for power on and turn off VCC after VEN for shutdown. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. 2 changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Evaluation Board Schematic VCC (Typ. = 2.4 V) Rev. V3 C7 C9 C8 C6 T2 T3 L1 T1 C2 T4 C5 RF IN C1 C4 RF OUT R1 Ven (Typ. = 2.5 V) C3 MAAPSS0071 External Parts List Designator C1 C2, C4 C3 C5, C6 C7, C8 C9 R1 (VEN = 2.5 V) R1 (VEN = 1.7 V) L1 Value 1 pF 3 pF 22 nF 47 pF 100 nF 4 pF 470 Ohm 100 Ohm 10 nH Footprint 0402 0402 0402 0402 0402 0402 0402 0402 0402 Manufacturer Murata Murata Murata Murata Murata Murata KOA KOA Coilcraft Part ID GRM1555C1H1R0CZ01B GRM1555C1H3R0CZ01B GRM155R71C223KA01B GRM1555C1H470JZ01B GRM155F51C104ZA01B GRM155C1H4R0CZ01B RK73B1ET470J RK73B1ET101J 0402CS-10NXJB Transmission Line Dimensions, 0.20 mm FR4 Designator T1 6 Length (mm) 5 2.16 2.54 3.05 3.94 Width (mm) 0.37 0.37 0.37 0.37 T2 T3 T4 5. From package edge to center of component. 6. T1 is measured from package edge (not C2) to the center of C1. Jumper Jumper 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Typical Characteristics, VEN = 2.5 V (Using the supplied sample board BOM) POUT, PAE, ICC vs. PIN @ 2.4 V, 1900 MHz 50 PAE 40 0.8 40 0.8 1.0 Rev. V3 POUT, PAE, ICC vs. VCC @ 1900 MHz, PIN = 0 dBm 50 PAE 1.0 30 0.6 P OUT 30 0.6 P OUT I 20 I 10 CC 0.4 20 CC 0.4 0.2 10 0.2 0 -20 0.0 -15 -10 -5 0 5 0 1.5 2.0 2.5 3.0 3.5 0.0 4.0 PIN (dBm) VCC (V) POUT vs. Temperature @ 1900 MHz, PIN = 0 dBm 29 ICC vs. Temperature @ 1900 MHz, PIN = 0 dBm 0.6 3.0 V 28 3.0 V 0.5 2.4 V 0.4 27 0.3 2.0 V 2.4 V 26 0.2 25 2.0 V 0.1 24 -20 0 20 40 60 80 0.0 -20 0 20 40 60 80 Temperature ( C) Temperature ( C) POUT vs. VCC @ 1900 MHz, PIN = 0 dBm 30 P 20 OUT POUT, PAE, ICC vs. Frequency @ VCC = 2.4 V, PIN = 0 dBm 50 PAE 40 I CC 0.5 0.4 10 30 0.3 P 0 2Fo -10 3Fo 10 20 OUT 0.2 -20 0.1 -30 2.0 2.2 2.4 2.6 2.8 3.0 0 1.80 1.84 1.88 1.92 1.96 0.0 2.00 VCC (V) Frequency (GHz) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Typical Characteristics (All data uses the supplied sample board BOM) S21 vs. Frequency @ VCC = 2.4 V, VEN = 2.5 V 30 25 20 -10 Rev. V3 S22, S11 vs. Frequency @ VCC = 2.4 V, VEN = 2.5 V 0 -5 15 -15 10 -20 5 0 -5 1.0 -25 S11 S22 -30 1.5 2.0 2.5 3.0 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Typical Characteristics, VEN = 1.7 V (All data uses the supplied sample board BOM) POUT, PAE, ICC vs. PIN @ 2.4 V, 1900 MHz 40 PAE 30 0.8 P OUT POUT, PAE, ICC vs. VCC @ 1900 MHz, PIN = 0 dBm 1.0 40 PAE 30 P OUT 1.0 0.8 20 I 10 0.6 20 I CC 0.6 CC 0.4 10 0.4 0 0.2 0 0.2 -10 -15 -10 IN 0.0 -5 0 5 -10 2.0 2.3 2.6 2.9 3.2 0.0 3.5 P (dBm) V CC (V) POUT, PAE, ICC vs. Freq. @ 1900 MHz, PIN = 0 dBm 50 I 40 PAE 30 P 0.3 OUT CC POUT vs. VEN @ 2.4 V, 1900 MHz, PIN = 0 dBm 30 20 0.5 0.4 R = 100 Ohm 10 0 -10 20 0.2 -20 -30 10 0.1 -40 0 1.80 0.0 2.00 -50 0.5 1.0 1.5 2.0 2.5 1.84 1.88 1.92 1.96 5 Frequency (GHz) V EN (V) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MAAPSS0071SMB |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |